Inventory

Correa F3UE used universal milling machine with Hure head, table of 1400x340mm and travels of 110...

Sabi 14" Reciprocating Saw. Round cutting capacity: 150mm. | Square cutting capacity: 140mm. | Engine power:...

Fexac UH used universal milling machine with automatic movement ram. Equipped with Hure head and ...

Uniz 18" Reciprocating Saw. Round cutting capacity: 250mm. | Square cutting capacity: 225mm. | Engine power:...

Amutio Cazeneuve HB500 rebuilt lathe. Equipped with 250mm universal chuck. Protections on chuck a...

Amutio Cazeneuve HB575 rebuilt lathe of 1000. Equipped with 250mm universal chuck. Protections on...

Rebuilt Amutio Cazeneuve HB725 lathe of 1000. Equipped with new MQD 315mm universal chuck. Protec...

Arrieta CGM 10/2 mechanical guillotine shear. Mechanical clutch. Rear stops. CE. Sheet metal length: 1050mm.

Balma VISS 3010 soundproof compressor. Balma EA 3000 dryer. Pressure: 16 bar. | Flow: 3000 l/min. | Power: 2...

Goyar mechanical roller with pre-curving. Length of rollers: 1500mm | Sheet metal bending capacity: 4mm.

Goyar 3C-25/20 pyramidal mechanical roller. Length of rollers: 2000mm. | Sheet metal bending capacity: 25mm.

Josval Mistral 15A soundproof compressor. Masteria MPE 020 dryer. Pressure: 8 bar | Flow: 1811 l/min. | Powe...

Danobat 1600-RP universal grinding machine. Fagor single-axis display. Distance between points: 1600mm.

Lasa RM10-200DL winder with flattener and mechanical speed variator. 11-roller flattener. Capacity width: 25...

Loire Safe PH90/30 hydraulic folding machine. Folding length: 3050mm. | Folding power: 90Tn. | Between uprig...

Promecam RG203 hydraulic folding machine. With tools. Rear stops. Folding length: 3000mm | Bending force: 20...

Used Erlo S-18 benchtop drill. With base. CE. Drilling capacity: 18mm. | Threading capacity: M14. | Table: 2...

Used Erlo TCA-60 column drill. 700mm cross table. CE RD1215/97 certified and guards. Drilling capacity: 60mm.

Used Iba-E35 column drill. 9 speeds. (70-1406rpm). Protections and CE RD1215/97 certificate. Drilling capaci...

Iba Eap 60 prismatic column drill. Drill: 60mm.

Ibarmia A-35 column drill. Drilling capacity: 35mm. | Table: 560x480mm. | speeds: 9 (81-1274rpm).

Fast radial drill. Fixed table 1300x650mm. Drilling capacity in steel: 25mm. | Drilling capacity in casting:...

Soraluce TR0-1250 radial drill. 1250mm arm. Drilling capacity in steel: 40mm. | Drilling capacity in casting...

Soraluce TR0-1250 radial drill. 1250mm arm. Drilling capacity in steel: 40mm. | Drilling capacity in casting...

Soraluce TR1-1600 radial drill. 1600mm arm. Drilling capacity in steel: 60mm. | Drilling capacity in casting...

Soraluce TR3-2500mm radial drill. 2500mm arm. Morse taper 6. Drilling in steel: 80mm. | Drilling in casting:...

GER RHC1500 universal grinding machine. Internal grinding head. Distance between points: 1500mm | Maximum di...

GER RS-12/50 tangential grinding machine. Manual diamond cutter. Adjustable vertical head. Automa...

Gurutzpe Super AT lathe. Motorized carriage. 4-jaw independent chuck. Heidenhain display. Distance between p...

Gurutzpe Super A lathe. Equipped with 4 independent jaw chuck and steady rest. Equipped with new ...

Ibarmia 1B60 prismatic column drill. Morse taper 4. Drilling capacity: 60mm. | Table: 700x600mm. | Vertical ...

Ibarmia 1B70 prismatic column drill. Prepared for automatic drilling of flanges. Pneumatic spindl...

Kair TM800x400 hydraulic tangential grinding machine. Max. rectifiable length: 800mm | Max. rectifiable widt...

Amutio Cazeneuve HB500 rebuilt lathe. Protections on the plate and carriage and CE certified (RD1...

Amutio Cazeneuve HB500 1500mm rebuilt lathe. Equipped with 250mm universal chuck and steady rest....

Amutio Cazeneuve HB500 rebuilt lathe, 2000mm. Equipped with 250mm universal chuck and steady rest...

Amutio Cazeneuve HB575 rebuilt lathe of 750. Equipped with 250mm universal chuck. Protections on ...

Rebuilt Amutio Cazeneuve HB575 lathe of 1500. Equipped with 250mm universal chuck and steady rest...

Amutio Cazeneuve HB575 rebuilt lathe from 2000. Headstock spindle taper: Equipped with 250mm univ...

Amutio Cazeneuve HB575 rebuilt lathe of 3000. Headstock spindle taper: Equipped with 250mm univer...

Amutio Cazeneuve HB575 rebuilt lathe of 4000. Headstock spindle taper: Equipped with 250mm univer...

Amutio Cazeneuve HB725 rebuilt lathe of 1500. Headstock spindle taper: Equipped with 315mm univer...

Amutio Cazeneuve HB725 rebuilt lathe. Equipped with 315mm universal chuck and steady rest. Protec...

Amutio Cazeneuve HB725 rebuilt lathe. Headstock spindle cone: Protections on plate and carriage a...

Amutio Cazeneuve HB725 rebuilt lathe. Protections on plate and carriage and CE certified (RD1215/...

Amutio Cazeneuve HB725 rebuilt lathe of 5000. Equipped with 315mm universal chuck and steady rest...

Amutio Cazeneuve HB725 rebuilt lathe. Protections on the plate and carriage and CE certificate (R...

Amutio Cazeneuve HB810 rebuilt lathe. Equipped with new 400mm universal chuck and steady rest. Pr...

Amutio Cazeneuve HB810 rebuilt lathe. Equipped with new 400mm universal chuck and steady rest. Pr...

Amutio Cazeneuve HB810 rebuilt lathe. Equipped with new plate and steady rest. Protections on pla...

Amutio Cazeneuve HB810 rebuilt lathe. Equipped with universal chuck and steady rest. Protections ...

Amutio Cazeneuve HB810 rebuilt lathe. Protections on the plate and carriage and CE certified (RD1...

Amutio Cazeneuve HB810 rebuilt lathe. Equipped with new plate and steady rest. Protections on pla...

Demoor 825-320 oil lathe. Carriage with cone copying machine. New electrical cabinet. Equipped wi...

Echea A-II-6000 parallel lathe. Equipped with plate and two steady rests. Distance between points: 6,000mm.

Geminis GE650S parallel lathe to be rebuilt. Motorized carriage and chariot. Protections on plate...

Used Geminis GE870 parallel lathe. 18 speeds (16-1250rpm) Equipped with universal chuck. Equipped...

Gurutzpe Super A lathe. 16 speeds (9-500rpm) Equipped with 500mm plate. Distance between points: 4500mm.

Gurutzpe Super BT lathe. Equipped with plate and steady rest. Fagor display. CE protections. CE c...

Lacfer CR2-E250 lathe. 16 speeds (18-1600). Equipped with chuck. Fagor display Distance between points: 2,00...

Used Lacfer CR2-E250 lathe. 16 speeds (18-1600). Equipped with plate and steady rest. Quick-chang...

Lacfer CR2-E250 Rebuilt Lathe. 16 speeds (18-1600). Equipped with universal chuck. Equipped with ...

Urpe M200 vertical mortising machine. With plate. Adjustable course: 0-200mm. | Table dimensions: 650x220mm.

Machined table. Levelling screws. 60x35mm T-slots. Possibility of including a movable radial drill. Measures...

Merli Clovis 70 lathe. Equipped with 1400mm plate. Equipped with steady rest. Equipped with displ...

New hydraulic folding machine MQD. CE Folding power: 125Tn. | Folding length: 3200mm. | Distance between upr...

New Nardini MS175 parallel lathe. Equipped with plate and steady rest. Distance between points: 800mm | Turn...

New Nardini ND250 parallel lathe. Equipped with plate and steady rest. Distance between points: 2200mm.

New Nardini NZ250 parallel lathe. Equipped with plate and steady rest. Distance between points: 1000mm.

Tago M-900 radial drill. 900mm arm. Drilling capacity in steel: 50mm. | Drilling capacity in casting: 60mm.

Pinacho S90-310 lathe. Equipped with chuck. Equipped with Heidenhain display. CE. Distance between points: 1...

Hydro-Precis RSP1500 tangential grinding machine. 1500x350mm electromagnetic chuck. Hydraulic dia...

Hydro-Precis RSP600 tangential grinding machine. Table race: 700mm. | Rectifiable surface: 600x350mm. | Maxi...

Used Sabi PBS320A automatic band saw. CNC Sabi-Pegamo. Schneider touch screen. Self-centering jaws.

New parallel lathe SC1 HPL510. Protections on plate, carriage, fairing and CE certified. Equipped...

Uniz TC-280 manual band saw. Cutting capacity: 280mm. | Power: 1.5hp.

Used Zayer 2000BF fixed bed milling machine equipped with DRO Fagor and Hure head. Table size: 2500x700mm.

Zayer 55BM used universal milling machine with automatic movement ram. Equipped with Hure head an...

Correa FU200 used universal milling machine with Hure head, table of 2000x480mm and travels of 17...

CME FU2 used universal milling machine with Hure head, table of 1400x300mm and travels of 1050x30...

Correa F2UE used universal milling machine equipped with DRO Fagor for 3 axis and Hure head, tabl...

CME FU2 used universal milling machine equipped with DRO Fagor for 3 axis and Hure head, table of...

CME FU2 used universal milling machine equipped with DRO Fagor for 3 axis and Hure head, table of...

Fexac FU160CM used universal milling machine with automatic movement ram. Equipped with Hure head...